Tenmiro LED Lights Instructions Manual Installation Tenmiro LED Lights APP Remote Control How to use

Tenmiro Led Strip Lights Instructions

Tenmiro LED Lights Instructions

Scan the QR Code

Tenmiro LED Lights APP

Tenmiro led lights App Control all of functions convenient!

Tenmiro App name “Keepsmile”

Tenmiro led app

how to connect Tenmiro LED Lights to phone

  1. APP name is “Tenmiro” Please search for and install the application in Google play and Apple store or via the QR code on the manual/controller
  2. Connecting power with the device to let the light on first, then open the Bluetooth of your smart phone
  3. Then strip lights automatically connect to the APP
  4. If you have any questions about the use of the APP, you can refer to the Setting-Guide in the upper right corner of the APP interface
  5. Note: IOS 8.0 or Android 4.3 or later edition required. Your smart device should support Bluetooth 4.0 or later version

Adjust Functions are listed as follows:

  1. Color: Adjust the color and brigheness,16 million kinds of colors of your choice
  2. tenmiro led strip lights music sync
  3. Music: When you play the music, the light strip will sync with the music and change the color and flashing speed;
  4. Rhythm: Built-in high-sensitivity microphone, the light strip will change the color and speed according to the volume of sound source and the speed of speaking;
  5. Scene: Multiple modes to choose from, including strobe, static, gradual, fade. You can choose the right mode according to the atmosphere;
  6. Timer: Set the timer, the light will turn on/off according to your schedule

Tenmiro led lights remote instructions Installation

Tenmiro led lights tutorial / Tenmiro led lights installation Instrutions

  1. Open the package and spread the strip straight. Please check whether the strip light appearance and all parts are in good condition. Then power the strip light to test whether it could light normally.
  2. Clean the surface of the object where the strip needs to be installed and keep it dry. Any dust and liquid will affect the stickiness of adhesive. The surface where the light adhere must be smooth and clean, otherwise the strip lights will fall off.
  3. Tear off the adhesive tape,paste the strip on the correct place at once time. Press the strip firmly from the beginning to the end to remove the air from the strip and the surface of the object. (Notice: Do not move the strip light to other place after it is attached.)
  4. Considering the gravity of the strip light themself and other influence, you can place a clip to each section of the strip light to reinforce it. If there is a corner, place the clips on each side of the right angle
  5. The installation is over, please connect the power with strip light.
    You can switch the light on/off and choose the color effect using the control box or remote or APP. Enjoy your new strip light!

44 Keys Remote Control

Version 1

Tenmiro LED Lights 44 keys Remote control

Tenmiro led lights remote instructions

  • ON/OFF
  • Pause/Run Lighting Mode
  • Brightness Adjustment
  • Color Change
  • Color Degree Increase/Decrease
  • DIY Mode
  • 3/7 Colors Jumping Change
  • 3/7 Colors Cross Fade
  • Flash Mode
  • Automatically Change Colors and Modes
  • Speed of Color Changing
  • Four music modes

44 Keys Remote Control Version 2

  • 1.Turn on / Turn Off
  • 2. Bright Adjustment
  • 3. 16 Static Colors
  • 4. Sunrise and Sunset Pattern
  • 5. Sensitivity Adjustment,
  • Under the Modes:
  • JUMP3, JUMP7,FADE3, FADE7, FLASH,AUTO, Can adjust sensitivity
  • 6. Four music mode
  • 7. The timing function can be set to 1H, 3H, 6H, 9H for four different Times to Close.
  • 8. Under the modes: JUMP3, JUMP7, FADE3, FADE7,FLASH,AUTO, Can speed up the change (blevels)
  • 9 JUMP3: 3 colors Jump Change
  • JUMP7: 7 colors Jump Change
  • FADE3: 3 colors Gradient
  • FADE7: 7 colors Gradient
  • AUTO:JUMP3, JUMP7, FADE3, FADE7 AND FLASH mode auto matically cycle
  • FLASH: 7 colors alternately flashing

Music Mode1: The red light flashes quickly after 3 times (seven color gradient + music control mode, suitable for ordinary music). When there is no music, the led light will automatically color the gradient.

Music Mode2: The green light flashes quickly after 3 times (seven color gradient + music control mode, suitable for tender music). When there is no music, the led light will automatically change the color of breath.

Music Mode3: The green light flashes quickly after 3 times (seven color gradient + music control mode, suitable for dynamic music). When there is no music, the current fixed color does not change.

Music mode4: The Purple light flashes quickly after 3 times (Only music control mode, suitable for DJ music). When there is no music, the led light do not light.

Preparation before installation

1.Please pay attention to anti-static during the installation and use of the product. Do not use sharp
objects to touch the product, and avoid contact with strong chemicals such as strong acid and alkali.
2.There is no hidden nail or metal conductive object in the contact part between the lamp and the wall. If there is, remove or avoid the conductive object in advance to prevent unnecessary short-circuit of the led light strip.
3.The working voltage of the lighting is 100-240V,please do not make the working voltage of the lighting exceed the maximum allowable range. Please do not exceed the length more than 32.8ft on each port connection Customer Service
We are looking forward to provide the perfect services for you, and will pay attention to your feedback.
Should you have any question, please give me the letter via Support004@keepsmile.vip

Tenmiro led lights music

Tenmiro LED Lights music sync

  • Tenmiro LED Lights music sync open by choose music mode

Can you cut Tenmiro led lights

Tenmiro led lights diy

Tenmiro LED Lights cut

  • If you want to cut Tenmiro LED Lights, you must choose the cuttable version of Tenmiro LED Lights


  • Specifications
  • LED type: 5050 RGB
  • LED quantity: 270PCS
  • Output power: 36W
  • Input voltage of adapter: AC100V-240V
  • Output voltage of adapter: DC 24V
  • Remote distance: within 5M

Packing List

  • 50ft LED Strip Lights: 1
  • Controller Box: 1
  • 44-KEY IR remote Control: 1
  • Power Adapter: 1
  • Instruction Manual: 1

Thank you for purchasing our products, please read the instructions carefully before use
Tenmiro is a brand dedicated to the development of high-end Led light strips.The company is equipped with a professional Led light strips development team and production plant.
Tenmiro’s products will definitely add a lot of fun to your life.We are always striving to provide customers with quality products and the most satisfactory service.

The battery case and receiver do not immerse in water. The LED srip light kit do not immerse in fire
Childern unde age of 16 should use this product adult supervision

Tenmiro LED Lights website

Tenmiro LED Lights website not launch now!

Tenmiro LED Lights app not working

EC REP CE FC Recycle

tenmiro led lights diy instructions

keep smile led lights how to connect

keepsmile led lights tutorial

tenmiro led lights bluetooth instructions

tenmiro led strip lights instruction manual

tenmiro 5050 led strip light instructions